Trending Searches

    History

      Clear All
      DCircuit Lab

      DCircuit Lab

      • Sizes: 28.06MB
      • Version: 2.1
      • Update: 2023-02-21
      Install by Apple Store

      DCircuit Lab Description

      DCircuit Lab is a tool for simulating combinatorial and sequential digital circuits. Circuits can be simulated in two ways: 1) one single step: all the outputs values are evaluated at the same time. 2) step by step: outputs and gates are evaluated one step a time. This shows how each gate's output changes and how changes propagate through the circuit. This feature is very useful to understand complex circuits behavior. At the end of each simulation step, each gate may have a different color: ■ black: gate's output unchanged during the just ended simulation step ■ dark green: gate's output evaluated during the just ended simulation step ■ light green: gate's output evaluated during the just ended simulation step, gate needs to be evaluated again during the next simulation step ■ blue: gate needs to be evaluated during the next simulation step At the end of the simulation, each wire's color corresponds to the digital value carried on itself: red for 1 and gray for 0. If circuit contains clock inputs, it's simulation is dynamic. This means that outputs change accordingly to the clocks. During this dynamic simulation, user can change inputs values to study the circuit behavior. Once the simulation is stopped, a circuit timing chart is available. Circuits are built using basic components, gates and flip-flops: ■ input pins ■ output pins ■ clock ■ wires ■ 2 inputs and 3 inputs AND gates ■ 2 inputs and 3 inputs NAND gates ■ 2 inputs OR gates ■ 2 inputs NOR gates ■ 2 inputs XOR gates ■ NOT gates ■ Flip-flop RS, JK, T, D ■ Multiplexer (4 outputs) ■ Demultiplexer (4 inputs) Circuits may be controlled by means of the following gesture: ■ Drag: to move the circuit into the desired position ■ Tap on a gate: to modify the gate ■ Double Tap on a gate: to modify the gate ■ Double Tap on a input pin: change its value from 1 to 0 or from 1 to 0 ■ Pinch: to zoom in and out ■ Double finger double Tap: to reset position and zoom level to the original values Circuits may be easily stored and reused. Some video tutorials are available to learn using the application. Visit the site to see the tutorials.

      DCircuit Lab Information

      Name DCircuit Lab

      Category Productivity

      Developer Fabrizio Boco

      Version 2.1

      Update 2023-02-21

      Languages EN,IT

      Size 28.06MB

      Compatibility Requires iOS 14.0 or later. Compatible with iPhone, iPad, and iPod touch.

      Other Original Version

      DCircuit Lab Screenshot

      DCircuit Lab
      DCircuit Lab
      DCircuit Lab
      DCircuit Lab

      Rating

      4.5

      1330 Ratings

      Tap to Rate

      Please use Safari on iPhone/iPad to access the current page

      Because Panda Helper VIP service is based on iPhone/iPad device information (UDID), please access the current page in Safari on iPhone/iPad:
      • Scan the QR code on your iPhone/iPad
      • Copy the link below and open it in Safari on your iPhone/iPad
      * Safari only. Other browsers cannot get device information
      copy successfully!

      Follow us on social media

      panda helper top hover